Maxon SL100K, User Manual

Page: 14 / 73

DIAGNOSTIC MESSAGES
In addition to the low battery condition, a flashing red status
LED may also indicate fault conditions
Should your radio apparently not operate correctly, replace
the battery with one known to be fully charged. If the
condition persists, or the radio emits an unexpected
continuous pattern of audio beeps, or will not transmit or
receive as it does normally, return the radio to your Maxon
Reseller.
NOTE: All audible tones can be programmed 'off' for silent
operation
ACCESSORIES
A full range of Maxon accessories are available to use with
this product. Please contact your Maxon Reseller for more
information or visit www.maxon.co.uk
ENGLISH
12
Status Description LED LCD Tone
Colour Indication
Normal Power On - 188 Melody
Call Received Orange Chan Number -
Correct Call Green Chan Number -
Busy Channel Orange Chan Number -
Valid Selcall Flashing Chan Number 1 to 3
Decode Green Tone Alert
Transmit Red Chan Number -
Transmit Not Red Alternating UL /2 Beeps
Allowed Flashing Chan Number Repeated
Radio Stunned N/A Chan Number 2 Beeps
Radio Revived N/A Chan Number Melody
Warning Low Battery Red LC 3 Beeps
Flashing Repeated
Busy Channel Orange bL Single beep
Lockout repeated
Tx Inhibit N/A _h / r0 2 beeps
Eprom Error - Er Single beep
repeated
Out of Lock - UL 2 Beeps
Repeated