Maxon multimax+ User Manual Download

Page: 67 / 139

Multimax_user manual_v.4.0.4 July. 11, 2018 67/139

Confidential

Enable NAT Traversal

Click the toggle button to enable/disable the NAT Traversal function. This
option must be enabled when router under NAT environment.

Keepalive

Set the keepalive time, measured in seconds. The router will send packets
to NAT server every keepalive time to avoid record remove from the NAT
list.

Debug Enable

Click the toggle button to enable/disable this option. Enable for IPsec VPN

information output to the debug port.

OFF

3.8.1.2 - Tunnel

Click

to add tunnel settings. Maximum of 3 tunnels can be added.

General Settings @ Tunnel

Item

Description

Default

Index

Indicate the ordinal of the list.

Enable

Click the toggle button to enable/disable this IPsec tunnel.

Description

Enter a description for this IPsec tunnel.

Null

Gateway

Enter the address of remote side IPsec VPN server. 0.0.0.0 represents for any
address.

Null

Summary of Contents for multimax+












































































































































Search results

Summary of Contents for multimax+

Reviews:

Related manuals for multimax+

Brands by name

Popular brands

Maxon multimax+, User Manual

Search results

Summary of Contents for multimax+

Reviews:

Related manuals for multimax+

Brands by name

Popular brands