Maxon multimax+, User Manual

Page: 126 / 139

Multimax_user manual_v.4.0.4 July. 11, 2018 126/139
Confidential
reboot Halt and perform a cold restart
route Static route modify dynamically, this setting will not be saved
set Set system configuration
show Show system configuration
status Show running system information
tftpupdate Update firmware using tftp
traceroute Print the route packets trace to network host
urlupdate Update firmware using http or ftp
ver Show version of firmware
5.2 How to Configure the CLI
Following is a table about the description of help and the error should be encountered in the
configuring program.
Commands /tips Description
? Typing a question mark “?” will show you the help information.
Ctrl+c Press these two keys at the same time, except its “copy” function but also
can be used for “break” out of the setting program.
Syntax error: The command is not
completed Command is not completed.
Tick space key+ Tab key It can help you finish you command.
Example:
# config (tick Enter key)
Syntax error: The command is not completed
# config (tick space key+ Tab key)
commit
save_and_apply loaddefault
# config save_and_apply /
#config commit
When your setting finished, you should enter those commands to make
your setting take effect on the device.
Note: Commit and save_and_apply plays the same role.
Quick Start with Configuration Examples
The best and quickest way to master CLI is firstly to view all features from the webpage and then
read all CLI commands at a time, finally learn to configure it with some reference examples.
Example 1: Show current version
# status system
hardware_versio
n = 1.2