maxon motor
4-Q-DC Servo Control LSC 30/2
Operating Instructions
1 Safety Instructions
Skilled personnel
Only skilled, experienced personnel should install and start the equipment
Statutory regulations
The user must ensure that the amplifier and the components belonging to it
are assembled and connected according to local statutory regulations.
Load disconnected
For initial operation, the motor should be free running, i.e. with the load
disconnected.
Additional safety equipment
Any electronic equipment is, in principle, not fail-safe. Machines and
apparatus must therefore be fitted with independent monitoring and safety
equipment. If the equipment breaks down, if it is operated incorrectly, if the
control unit breaks down or if the cables break etc., it must be ensured that
the drive or the complete apparatus is kept in a safe operating mode.
Repairs
Repairs may only be carried out by authorized personnel or the
manufacturer. It is dangerous for the user to open the unit or carry out any
repairs.
Danger
Ensure that no apparatus is connected to the electrical supply during
installation of the LSC 30/2! After switching on, do not touch any live parts!
Max. supply voltage
Make sure that the supply voltage is between 12 and 30 VDC. Voltages
higher than 32 VDC or of the wrong polarity will destroy the unit.
Electrostatic sensitive device (ESD)
2
maxon motor control
June 2010 Edition / Subject to change
