background image

About
About this Document

maxon motor control

1-4

Document ID: rel4734

ESCON Servo Controller

Edition: November 2014

ESCON Module 50/5 Hardware Reference

© 2014 maxon motor. Subject to change without prior notice.

Table 1-2

 Symbols & Signs

1.1.5

Trademarks and Brand Names

For easier legibility, registered brand names are listed below and will not be further tagged with their 
respective trademark. It must be understood that the brands (the list below is not necessarily conclud-
ing) are protected by copyright and/or other intellectual property rights even if their legal trademarks are 
omitted in the later course of this document.

Table 1-3

 Brand Names and Trademark Owners

1.1.6

Copyright

© 2014 maxon motor. All rights reserved.

The present document – including all parts thereof – is protected by copyright. Any use (including repro-
duction, translation, microfilming, and other means of electronic data processing) beyond the narrow 
restrictions of the copyright law without the prior approval of maxon motor ag, is not permitted and sub-
ject to prosecution under the applicable law.

Mandatory
Action

(typical)

Indicates a mandatory action. Hence, 

you must

!

Information

Requirement / 
Note / Remark

Indicates an activity you must perform prior 
to continuing, or gives information on a particular 
item you need to observe.

Best Practice

Indicates advice or a recommendation 
on the easiest and best way to proceed.

Material 
Damage

Indicates instructions on how to prevent damage 
to the equipment.

Brand Name

Trademark Owner

Windows®

© Microsoft Corporation, USA-Redmond, WA

maxon motor ag

Brünigstrasse 220
P.O.Box 263
CH-6072 Sachseln

Phone

Fax

Web

+41 41 666 15 00
+41 41 666 16 50
www.maxonmotor.com

Type

Symbol

Meaning

Summary of Contents for ESCON Module 50/5























































Reviews: