background image

MaxLite LED Outdoor Fixture Limited Warranty

LIMITED WARRANTY FOR CERTAIN MAXLITE® LED LIGHTING FIXTURES, SPECIFICALLY WALL PACKS; FLOOD LIGHT;

AREA LIGHT; CANOPY; GARAGE; PARKING; SECURTIY LIGHT; VAPOR TIGHT AND ROADWAY.
This limited warranty is provided by the MaxLite company described below ("Seller") to you as the original purchaser of the

LED lighting product that is identified on Seller's invoice reflecting its original purchase (the "Product"). The Seller is the

MaxLite Company identified as such on the invoice. This limited warranty may be transferred to subsequent purchasers of the

Product, provided that such Product is resold in new condition and in its original packaging. Seller warrants that the Product,

when delivered in new condition and in its original packaging, will be free of defects in material and workmanship for a period

of FIVE (5) YEARS from the date of original purchase or the number of hours used has not exceeded the L70 life stated for

each LED fixture. The determination of whether the Product is defective shall be made by Seller in its sole discretion with

consideration given to the overall performance of the Product. A Product shall not be considered defective solely as a result

of the failure of individual LED components to emit light if the number of inoperable components is less than 10% of the total

number of LED components in the Product.
If Seller determines the Product is defective, Seller will elect, in its sole discretion, to refund you the purchase price of the

Product, repair the Product or replace the Product. This limited warranty does not apply to loss or damage to the Product

caused by: negligence; abuse; misuse; mishandling; improper installation, storage or maintenance; damage due to fire or

acts of God; vandalism; civil disturbances; power surges; improper power supply; electrical current fluctuations; corrosive

environment installations; induced vibration; harmonic oscillation or resonance associated with movement of air currents

around the Product; alteration; accident; failure to follow installation, operating, maintenance or environmental instructions

prescribed by Seller or applicable electrical codes; or improper service of the Product performed by someone other than

Seller or its authorized service provider. This limited warranty excludes field labor and service charges related to the repair

| or replacement of the Product. THIS LIMITED WARRANTY IS VOID IF THE PRODUCT IS NOT USED FOR THE

PURPOSE FOR WHICH IT IS DESIGNED.
Seller reserves the right to utilize new, reconditioned, refurbished, repaired or remanufactured products or parts in the

warranty repair or replacement process. Such products and parts will be comparable in function and performance to an

original product or part, as determined by Seller in its sole discretion, and warranted for the remainder of the original

warranty period.
In order to make a warranty claim, you must notify Seller in writing within sixty (60) days after your discovery of the defect,

provide proof of purchase such as the invoice and comply with Seller's other warranty requirements. Upon receiving that

notice, Seller may require you to promptly return the Product to Seller, or its authorized service provider, freight prepaid.

Your warranty claim should be addressed to MaxLite, Inc., 12 York Ave. West Caldwell NJ 07006.
This limited warranty only applies to specified LED fixtures. Backup batteries, photocells, mounting accessories and other

fixture accessories can be found at www.MaxLite.com/lighting/products/warranty.
THE FOREGOING WARRANTY PROVISIONS ARE EXCLUSIVE AND ARE GIVEN AND ACCEPTED IN LIEU OF ANY AND

ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY

AGAINST INFRINGEMENT AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE.
IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL, COMPENSATORY, CONSEQUENTIAL, INDIRECT,

SPECIAL OR OTHER DAMAGES. SELLER'S AGGREGATE LIABILITY WITH RESPECT TO A DEFECTIVE PRODUCT

SHALL IN ANY EVENT BE LIMITED TO THE MONIES PAID TO SELLER FOR THAT DEFECTIVE PRODUCT.
This warranty is effective for purchases of Product on or after the effective date set forth below. Seller reserves the right to

modify this warranty from time to time. Any modification of this warranty shall be effective for all orders placed with Seller on

or after the effective date of such revised warranty.’
Effective Date: May 12, 2014

QuadroMAX LED Fixture

Summary of Contents for QuadroMAX QM Series

















Reviews: