Fixed Surface (FS)
1.)
Secure Wall Mount Bracket to Quadromax by tightening (2) 5/16-18 Internal HEX Head bolts
with split washers and gasket.
2.)
Orient Wall Mount Box and TOP position must be pointed up.
3.)
Secure Wall Mount Box to a Sturdy Mounting Surface.
4.)
Apply silicone sealant and seal the gap between wall and wall mount box Gasket and / Or Junction
box if needed.
5.)
Wire the fixture using UL listed wire connectors
6.)
Placed wired fixture over the Wall Mount Box and tighten the (2) 3/8-16 Internal HEX Head bolts
with split washers.
7.)
Check and make sure Gasket was compressed.
8.)
Tighten ½” NPS plug and apply silicone sealant to all unused conduit entry points.
QuadroMAX LED Fixture
