WARNING!
Keep your fingers clear of the hinge points while
folding the stand. Danger of fingers being
crushed or contused.
ASSEMBLY
47
46
model no. 055-9033-8 | contact us 1-800-689-9928
model no. 055-9033-8 | contact us 1-888-670-6682
ASSEMBLY
Fig. 14a
Fig. 14b
Fig. 14f
Fig. 14e
Fig. 14d
Fig. 14c
•
Grasp the handle I (4) firmly and tilt saw to
you. Push the saw to the desired location
(Fig. 14e) then either open the stand or store
the saw (Fig. 14d and 14f) in a dry
environment.
FOLDING THE STAND (Fig. 14a-14f)
To fold the stand for moving, return fence rails
and outfeed support to inner position. Store
the accessories securely. Lock fence rail lever.
•
•
•
Grasp the stand support assembly (1) and lift
it up until two stand legs (2) (located on side
of the wheel) raise off the ground, then
fold in two stand legs (2). To do this, push
the lock pins (3) until they unlock the stand
legs (2) from the holes, then swing the stand
legs (2) upward until the stand legs are
locked with the locking pins (3) engaging the
holes. (Fig. 14a)
Grasp the handle I (4) and tilt saw back onto
wheels until the stand is balanced on the
wheels (5) and stand support assembly (1).
(Fig. 14b-14c)
Fold in other two stand legs (6). To do this,
push the locking pins (7) until they unlock
the stand legs (6) from holes, then swing the
stand legs downward until the stand legs are
locked with the locking pins (7) engaging the
holes. (Fig. 14c)
1
2
6
6
4
7
1
5
5
5
2
4
4
3
5
Summary of Contents for 055-9033-8
Page 1: ......
