20
model no. 054-4297-2 | contact us 1-888-670-6682
TROUBLESHOOTING
PROBLEM
CAUSE OF THE PROBLEM
SUGGESTED CORRECTIVE
ACTION
Motor does not start.
Tool was not plugged in.
Check to see that the
supply cord is properly
connected to an electrical
supply.
Tool is still locked on
when the plug was pulled
out.
Depress and release the
trigger switch.
Tool stops working.
Tool is over heated.
Cool the tool.
Tool is forced.
Do not force the tool.
Carbon brushes have
worn out.
Replace carbon brushes.
Tool vibrates or
shakes.
Damaged wheel.
Replace the wheel.
Loose wheel.
Tighten the lock nut.
Spindle lock button
cannot be used.
Spindle lock button is
blocked by debris.
Clean the debris from
inside the spindle lock
button.
If the problem remains unsolved after performing the checks described above,
call the toll-free helpline at 1-888-670-6682.
TROUBLESHOOTING
