background image

24

model no. 054-4297-2  |  contact us 1-888-670-6682

h)  this warranty will not apply to any parts other than original parts, except to 

the extent that the retailer or manufacturer or persons authorized by either 
of them have repaired or replaced them;

i)  this warranty will not apply to any product that was sold to the original 

purchaser as a reconditioned or refurbished product (unless otherwise 
specified in writing);

j)  this warranty will not apply to any product or part thereof if any part from 

another manufacturer is installed therein or any repairs or alterations have 
been made or attempted by unauthorized persons;

k)  this warranty will not apply to normal deterioration of the exterior finish, 

such as, but not limited to, scratches, dents, paint chips, or to any corrosion 
or discolouring by heat, abrasive and chemical cleaners; 

l)  this warranty will not apply to component parts sold by and identified as 

the product of another company, which shall be covered under that product 
manufacturer’s warranty, if any; 

m)  any products replaced by the retailer in attempt to fulfill warranty 

obligations is subject to the original product warranty conditions and 
related time period as initiated by the original date of purchase; if product 
is purchased in Quebec, the warranty term will be extended for a period 
equal to the time during which the Quebec retailer possesses the product in 
attempt to fulfill warranty obligations; replaced product will not default to 
new product warranty conditions; and

n)  the retailer and manufacturer’s sole obligation and the purchaser’s sole 

remedy under this warranty shall be as set out herein. The warranties 
contained herein are not transferable and are given only to the purchaser. 
FURTHER, THE WARRANTIES SET OUT HEREIN ARE IN LIEU OF ALL 
OTHER WARRANTIES OR CONDITIONS, WHETHER EXPRESS, IMPLIED OR 
STATUTORY (INCLUDING SUCH AS ARISE UNDER THE SALE OF GOODS 
ACT OR THE INTERNATIONAL SALE OF GOODS ACT), ARISING OUT OF A 
COURSE OF DEALING OR USAGE OF TRADE OR OTHERWISE, INCLUDING, 
SUBJECT TO APPLICABLE LAW, ANY IMPLIED WARRANTIES OR 
CONDITIONS OF MERCHANTABILITY, MERCHANTABLE QUALITY, FITNESS 
OR ADEQUACY FOR A PARTICULAR PURPOSE OR USE, AND ALL OTHER 
SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED BY THE RETAILER AND 
MANUFACTURER.

Additional Limitations

This warranty applies only to the original purchaser and may not be transferred. 

This warranty applies for a period of 5 years from the date of original retail 
purchase, as indicated on the bill of sale. 

Neither the retailer, Maximum Canada, nor the manufacturer shall be liable for 
any other expense, loss or damage, including, without limitation, any indirect, 
incidental, consequential or exemplary damages arising in connection with the 
sale, use or inability to use this product.

WARRANTY

Summary of Contents for 054-4297-2



























Reviews: