6
Evolution HVLP ST687 TNT
US
4. Connect the front part of the gun and the
gun handle to each other. (Fig. 2)
5. Mount the air hose (Fig. 3, a + b).
6. Place the turbine only on a flat and clean
surface. Otherwise, the turbine may suck
in dust, etc.
7. Slide the ON/OFF switch to "I". (Fig. 4)
10. Operation
How the Spray Tanning system is handled,
including preparation of the work place
and spray tanning solution as well as the
final result, is the sole responsibility of
the operator.
Spray Tan Direct excludes any liability for
damage which may arise from overspray,
applica-tion errors, touch-ups, or non-
compliance with the instructions provided
here.
•
Turn the material control (Fig. 5, 1), in
order to adjust the desired delivery rate.
lower material volume (-):
turn anti-clockwise
higher material volume (+):
turn clockwise
Your goal is a 4 inch wide spray
pattern spraying 4 inches away.
•
Turn the air volume control (Fig. 6), in
order to optimize the atomization and
reduce overspray.
less air (-):
turn anti-clockwise
more air (+):
turn clockwise
•
Turn the air cap (Fig. 7, 1) with the union
nut (2) slightly unscrewed, to adjust the
shape of the spray jet:
Fig. 8a vertical flat jet:
For spray movements from left to
right
Fig. 8b horizontal flat jet:
For spray movements from top to
bottom
2
4
5
1
3
a
➟
b
