2
Evolution HVLP ST687 TNT
US
•
DO NOT let children play with the Spray Tanning System.
•
NEVER leave spray tanning system unattended.
•
Stay alert and watch what you are doing.
•
DO NOT operate the unit when fatigued or under the influence of drugs or alcohol.
•
Follow all appropriate local, state, and national codes governing ventilation, fire
prevention, and operation.
•
The United States Government Safety Standards have been adopted under the
Occupational Safety and Health Act (OSHA). These standards, particularly part 1910
of the General Standards and part 1926 of the Construction Standards should be
consulted.
•
NEVER direct the spray gun at animals.
•
Ensure that the spray area is well ventilated.
•
DO NOT breathe in spray tanning solution. Wearing nasal plugs and operating an
extraction fan designed for the purpose is recommended.
•
DO NOT spray into the eyes.
•
If spray tanning solution is sprayed into the eyes, wash them out with water
immediately and consult a doctor.
•
DO NOT spray spray tanning solution into open wounds or onto damaged skin.
•
Cover your hair when spraying your face. Otherwise bleached hair in particular could
be stained by the spray tanning solution.
•
NEVER immerse the Spray Tanning System into water.
•
WARNING!
NEVER use your Spray Tanning System near bath tubs, shower
trays or other receptacles that contain water.
•
NEVER place the Spray Tanning System near a washbasin or another water source.
Water always represents a hazard even when the system is switched off.
•
NEVER expose the equipment to rain.
•
DO NOT use outdoors or operate where aerosol (spray) products are being used.
•
NEVER drop or insert any object into any opening or hose.
•
NEVER block air openings of the spray turbine.
•
Keep electrical cord plug and spray gun trigger free from liquids.
NEVER hold the cord at plug connections to support the cord. Failure to observe may
result in an electrical shock.
•
Keep cord away from heated surfaces.
•
NEVER operate spray tanning system if cord or plug is damaged.
•
As additional protection, the installation of a circuit protective device such as ALCI or
GFCI is recommended. Ask your installer for advice.
•
Connect to a grounded outlet and use grounded extension cords.
•
DO NOT use a 3 to 2 adapter.
•
Unplug turbine before cleaning any parts.
•
Use only manufacturer authorized parts. User assumes all risks and liabilities when
using parts that do not meet the minimum specifications and safety devices of the
turbine manufacturer.
