8
Evolution HVLP ST687 TNT
US
12. After application of the spray tanning solution
i
The full tanning effect develops during the first 24 hours after the treatment.
•
Allow the spray tanning solution to dry for
5-10 minutes before getting dressed again.
i
You can also use the air from the
air hose to accelerate the drying
process of the spray tanning
solution. To do this, simply
remove the spray attachment
from the handle and switch the
system on.
•
Do not shower or bathe in the first 6-8
hours after application, as this will affect the tanning result. This will vary depending
on the tanning solution used.
•
Prolonged hot baths and showers should be avoided, in order to maintain the tanning
effect for as long as possible.
Daily moisturizing of the skin is also recommended.
13. Cleaning the spray tanning system
i
Clean the Spray Tanning System as required at the end of the working day. Dried
spray tanning solution makes cleaning more difficult and can even damage
the system.
1) Turn the system off and unplug.
2) Divide the spray gun. Press the hook
(Fig. 10 "click") slightly downwards.
Turn the gun front part and gun rear
part against each other.
3) Unscrew the container.
4) Pour any remaining spray tanning
solution back into the original
packaging.
5) Clean the container and feed tube with
a brush.
6) Clean the ventilating bore (Fig. 11, 1).
7) Pour 2 fl. oz of MaxiClean Spray Gun
Cleaner into the container. Screw the
container back on.
Do not use flammable materials for
cleaning purposes.
8) Assemble the gun again.
CLICK
10
