55
FIG. 9
FIG.11
FIG.10
FIG.12
5
TH
STEP: ACCESSORY STARTING
• All the accessories carry out the double function of suction
and steam. They fit in directly on the handle or on the
extensions.
• Move the ring nut to open position and keep it open (fig.9).
• Fit in the extension hose or the accessory (fig.10).
• Move the ring nut to close position. Release the spring wheel
for the hose extension.
• Press the button located on the start handle once and then
once again to stop suction (fig.11).
• To regulate the suction motor power, keep the button
pressed down during use (fig.11); every 4 seconds the power
will increase until it reaches maximum power (lev. 5) and
then it will restart from the minimum power (lev. 3). Once it
has reached the desired power, take pressure off the button;
the chosen power will be memorised.
• Keep the button under the handle pressed for steam and
then take pressure off it to stop (fig.12).
WARNING: DO NOT USE STEAM ON ELECTRIC
FIXTURES WHICH ARE ON OR ENERGIZED!
