STOP BUTTON
1. This button is always illuminated red when the toaster is in use.
2. The toasting operation can be halted at any time by pressing the red illuminated 'Stop' button.
3. The pop-up lever will lilt the toast automatically and the light will go out.
CLEANING AND STORING
Before attempting any cleaning operation, make sure that the toaster is unplugged from the power supply
and has fully cooled down.
1. Breadcrumbs will collect in the base of the toaster. It is important to avoid crumbs from building up
inside the base of the toaster. Allowing crumbs to build up in unhygienic, and could cause a fire hazard,
so remove them frequently. To remove them, slide the crumb tray from the base of the toaster. Clean
out the crumbs and slide the crumb tray back into the toaster.
2. To remove lodged bread, turn the toaster upside down and shake.
3. To clean the external surfaces, simply wipe over with a clean, soft damp cloth. Should it be necessary,
greasy marks may be removed using mild soap and a cloth dampened with hot water. Avoid all other
types of detergents, cleaners or solvents that might contain chemicals that could damage parts of the
toaster.
STORAGE
•
Never wrap the cord around the outside of the Toaster.
•
Wrap the cord neatly around the 'cord storage' provided on the underside of the toaster.
•
When not in use, remove the power plug from the mains electrical supply and store the toaster in a
dry, safe place, out of reach of children
FOR YOUR SAFETY
1. Always check full toaster operation as detailed above before returning any unit as faulty.
2. Do not operate the toaster with a damaged cord or plug, or after the unit malfunctions or is damaged in
any way. Return the complete toaster to the place of purchase for in-warranty replacement, or
inspection and repair.
3. This toaster contains no internal user serviceable parts.
4. In some products, the replacement of the power cord by the user is not intended. Special tools are
required to replace the cord. Return the complete toaster to the place of purchase for in-warranty
replacement, or inspection and repair.
WARNING!:
NEVER INSERT ANY METAL UTENSIL OR TOOL INTO TOASTING SLOTS. IT IS
DANGEROUS AND MAY DAMAGE WORKING PARTS OF THE TOASTER.
NOTE:
NEVER IMMERSE UNIT IN WATER OR ANY OTHER LIQUID.
CAUTION!:
NEVER OPERATE THE TOASTER WITHOUT THE CRUMB TRAY IN POSITION.
