Locate Forward-Facing
Belt Path
Thread the connector with the
adjuster closest to it though the
Forward-Facing Belt Path
opening as shown.
Pull it across the seat. Then
thread it through the other
Forward-Facing Belt Path
opening.
Do not twist belt.
Place Car Seat Forward-
Facing in Back Seat
continued on next page
43
2
3
4
Finished Lower Anchor
Belt Routing
44
6
Loosely Attach Tether Hook
to Vehicle’s Tether Anchor
Check vehicle owner’s manual
for specific location.
5
Make Car Seat Flush
Against Vehicle Seat
Put the child restraint into
Position
1
.
Only use the semi-reclined position
if necessary to install the child
restraint flush against the vehicle
seat back.
Vehicle seat back must be
upright.
NOTE: If your vehicle seat has
a headrest that interferes with
achieving a fl ush car seat
fi t,
check your vehicle owner’s
manual to see if it can be
removed, adjusted, or if there
are other possible seating
locations.
Adjuster
