EZ Out Buckle Cover
To install EZ Out Buckle Cover
,
slide buckle
into opening in front of buckle cover.
Then
be sure to slide buckle cover itself
through the buckle slot in only the seat pad.
NOTE:
Buckle cover only goes through slot
in pad and
not
through buckle slot in shell. It
lays fl at underneath the pad as shown.
To remove EZ Out Buckle Cover
, pull up on
buckle cover and slide it off of the buckle and
pull it out of the buckle slot in the seat pad.
4
Accessory Use
3
For Use in Rear-Facing
or Forward-Facing Mode
For Use in Rear-Facing Mode Only
EZ Out Harness Covers
Harness covers help provide comfort to the
neck. If the harness covers will not allow proper
positioning of the chest clip or interfere with
getting a tight enough harness fi t for a smaller
baby, remove and do not use.
Store until your child is large enough
to use these harness covers while
maintaining a properly fi tting harness.
To remove EZ Out Harness Covers
, undo
fasteners on headrest pad. Pull the fastening
strips on covers apart. Pull harness straps out
of covers. Slide covers out from behind
headrest pad.
To install EZ Out Harness Covers
, undo
fasteners on headrest. With the back of the
harness covers facing you slide covers behind
headrest pad. Place harness straps into covers.
Fasten harness covers.
Head and Back Pillow
The head and back pillows must be used
together.
To remove head pillow
, pull it out from
behind the back pillow.
To remove back pillow
, loosen the harness
straps and slide pillow out from behind the
harness straps.
Front View
Back View
Removable Cup Holders
The cup holders are top-rack
dishwasher safe.
To remove cup holder
,
twist the cup holder
counterclockwise. Pull it
out of slot in shell.
To install cup holder
, align
tabs on bottom of cup holder
with slots in shell. Twist
clockwise to lock in place.
For Use in All Modes
continued on next page
