manualshive.com logo in svg

Maxent MX-27X1, Owner'S Manual

Share
Download
Maxent MX-27X1 Owner'S Manual Download Page 54

54

Information Display

The information display sub-menu retains much useful information regarding the status of the monitor.  Explana-
tions for each type of information being displayed are listed below.

Accessing Information Display Menu

Press the 

 on the front panel or remote

control.  Use 

 to select the INFO option

from the menu and press   key to confirm
selection.

Various information is displayed in the INFO
menu.  To exit the INFO menu, use 

 to

select PREV. MENU option and press   key
to confirm exit.

S/W Version

Shows the monitor’s firmware version number.

H-Frequency

Displays the horizontal scanning frequency of the signal being displayed.

V-Frequency

Displays the vertical scanning frequency of the signal being displayed.

Video System

Displays the video system (NTSC) of the signal being displayed.

Resolution

Displays the resolution of the signal currently being displayed by the monitor.

Explanation of Information

Advanced Functions

Summary of Contents for MX-27X1
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands