Maxent MX-27X1, Owner'S Manual

Page: 15 / 95

15
Display Connections
Using TV Input
Connecting a DVD
Using Component Video Input
There are two sets of component video inputs provided. You can use either set of component inputs to connect
your DVD.
Connect the red (R) and white (L) audio-out
jacks from the VCR to the R and L audio-in
jacks located next to the yellow Video
connector.
Connect the output to TV (RF out or Antenna
out) connector from the VCR to the ANT input
on the back of monitor.
Notes:
! The TV input option is only available when a
TV tuner is installed.
! Cable must be connected from wall/cable
box into the VCRs antenna (RF) input.
Connect the green-colored (labeled as Y) jack
from the DVD to the green-colored jack of the
monitor.
Connect the red-colored (labed as Pr or Cr) jack
from the DVD to the red-colored Pr1/Cr1 jack of
the monitor.
Connect the blue-colored (labed as Pb or Cb)
jack from the DVD to the blue-colored Pb1/Cb1
jack of the monitor.
Connect the red (R) and white (L) audio jacks
from the DVD to the R and L audio-in jacks
located next to the Pr/Cr1 connector.