manualshive.com logo in svg

Maxent MX-27X1, Owner'S Manual

Share
Download
Maxent MX-27X1 Owner'S Manual Download Page 28

28

On-Screen Display Menu

Basic Operations

Accessing OSD Menu via Remote Control or Front Panel

The On-Screen Display (OSD) menu allows access to setup various parameters equipped with this display.

OSD Menu

Navigation

OSD Menu

Access

To access the OSD menu, press 

 button on

the front panel of monitor or press any one of
the four arrow keys located on the remote
control.

Navigation through the OSD Menu can be
accomplished using the arrow keys on the
remote control or using the front panel control
keys.

OSD Menu Timeout Setting

OSD Menu will automatically dissappear after a preset period of time so that it doesn’t remain on the screen.  To
change the OSD timeout period, please follow the steps below.

Access the OSD menu, select SETUP
submenu.  Use 

 keys to highlight OSD

TIMEOUT.  Press   key to confirm selection.

The OSD Timeout window is displayed.  Use 

 keys to adjust your settings.  Press  

key to confirm selection.

Summary of Contents for MX-27X1
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands