MAXDATA M-Book 6000 User Manual Download

Page: 98 / 202

BIOS Utilities

5 - 12 Advanced Menu

Legacy USB Support (Advanced Menu)

Use this menu item to enable/disable the support for Legacy Universal Serial Bus in
non-USB aware operating systems.

Boot-time Diagnostic Screen (Advanced Menu)

Use this menu item to enable/disable the Boot-time Diagnostic Screen or Power-On
Self Test (see

“The Power-On Self Test (POST)” on page 5 - 2

Legacy OS Boot: (Advanced Menu)

Enable this item to support only system boot from the Legacy OS (e.g

Windows 7

If disabled the system will attempt to boot from the EFI (Extensible Firmware Inter-
face) before the Legacy OS.

Power on Boot Beep (Advanced Menu)

Use this menu item to enable/disable the beep as the computer starts up.

Battery Low Alarm Beep

(Advanced Menu)

Use this menu item to enable/disable the audible warning when the battery has
reached low power status.

Summary of Contents for M-Book 6000











































































































































































































Search results

Summary of Contents for M-Book 6000

Reviews:

Related manuals for M-Book 6000

Brands by name

Popular brands

MAXDATA M-Book 6000, User Manual

Search results

Summary of Contents for M-Book 6000

Reviews:

Related manuals for M-Book 6000

Brands by name

Popular brands