3-2
MOUNTING DIMENSIONS
www.maxcessintl.com
MAGPOWR TLC-B
MI 850A356 1 A
Shaft and roller
diameters
When mounting inside the machine frame, clearance is required
for the installation fasteners. See dimensions illustrated below.
If 'Y' will be less than 50 mm [2.0 inches], then the roller
diameter 'X' should be less than the diameter of the intended
mounting bolt circle:
3-bolt pattern: 150 mm [3.5 inches] maximum
4-bolt pattern: 135 mm [3.0 inches] maximum
Roller and shaft with shoulder (dust seal installed)
Roller with no shoulder (no dust seal)
