4-4
FOLLOWER ARM APPLICATIONS
www.maxcessintl.com
MAGPOWR DFC-90
MI 850A265 1 G
Control setup
(continued)
Optional adjustments
Stop Multiplier and Stop Time
Use the STOP MULT pot to increase the torque while the machine
is stopping. The increased torque is applied when the RUN/STOP
input is closed (terminals 17 and 18). Rotate the STOP TIME pot to
adjust the length of time the increased torque is applied. The
STOPPED indicator illuminates when the Stop Time expires.
Operation
Adjust tension with the external 10kΩ tension pot.
Adjust rewind taper with the FULL pot. The tension will decrease
as the roll diameter increases without changing the remote
TENSION pot setting. Counter-clockwise rotation of the FULL pot
will decrease the tension at full roll, thereby increasing the
amount of taper.
Stop multiplier function
Rotate the STOP MULT pot clockwise to increase the stopping
torque.
Rotate the STOP TIME pot clockwise to increase the time that the
stopping torque is applied. The STOP TIME may be adjusted from
0.2 to 60 seconds.
