P.27
PU leather is made by the coating and drying of polyurethane. Compared with genuine
leather, PU leather is more resistant to tear, heat and sunlight. Depending on its nature and
chemical substances, however, it should be kept away from any dusty, high/low-tempera-
ture, humid environment, under direct sunlight or places with corrosive substance.
Otherwise, the leather could tear, quickening aging and hydrolysis.
1. Please do not use organic reagent or grease solution, especially strong solvent, e.g.
alcohol, turpentine and thinner, to clean the surface of the PU leather. Otherwise it will
corrode the surface.
2. Please do not use water or washing powder to clean the surface of the PU leather.
Otherwise there will be cracks.
3. When cleaning the surface of the PU leather, choose a cleaning agent that has a pH value
of between 5~7, no dentifrice, and is harmless to the environment.
4. For dirty PU surface, apply egg whites to the surface using a piece of soft cloth. Avoid
using a brush for cleaning.
Cleaning:
1. Keep a good ventilation indoor, overly dry or humid environment can accelerate the aging
of leather
2. Please keep the product away from direct sunlight or air vent, otherwise the leather will be
hardened. Direct sunlight will also cause fading.
3. People are generally sweatier in summer. The holes on the surface of the leather will
absorb sweat. While heat and high humidity prompt the chemical reaction between certain
substances in sweat and the leather, and hence, causes smell. Please clean the surface
more often with a piece of lightly wet cloth.
4. Please do not use alkaline cleaning agents on the leather. It will adversely affect the
elasticity of the leather and lead to cracks as a result.
Maintenance:
Maintenance and Cleaning of PU Leather
Kind Reminders
*
If the product has been used for long, please check the conditions as below:
-
Burnt smell.
-
Unstable power supply after contact with the power cord.
-
Power cord heating up.
-
Power cords damage.
-
Other abnormalities.
CAUTION
-
If above mentioned happens, please stop using the product.
-
Switch off the power supply, pull out the plug, and contact us.
-
Do not disassemblee the product by yourself.
Summary of Contents for MAX-76A100
Page 1: ...User Manual MAX 76A100...
