P.24
6. Touch Screen Monitor Holder Installation
Pic 7
Pic 1
Pic 2
Pic 4
Pic 3
How to Use
7. Clamp the groove at the rear end of the footrest cover is on the pin axis, and then press
the tip of the footrest cover until it is parallel to the rotating shaft cover plate, and the
convex points at the sides of the footrest should be stuck in the holes at the sides of the
footrest hook. The footrest installation is complete (Pic 7).
1. Take out the holder from the accessary bag. Attach the mounting flange of the holder to
the armrest (Pic 1).
2. Use two M4 screws to affix the flange tightly on the armrest (Pic 2).
3. Place the two metal plates of the decorative cover on the square frame on the armrest,
and then push them into the frame to lock them tightly (Pic 3).
4. When the installation is complete, shake slightly to check if it is stable (Pic 4).
Summary of Contents for MAX-76A100
Page 1: ...User Manual MAX 76A100...
