P.22
5. Hold the tip and the rear end of one armrest with both hands. Insert first the shaft at the
rear end of the armrest into the hole on the metal frame of the seat. Uplift the armrest slight
to check if the shaft is locked firmly (Pic 5).
6. When the rear end of the armrest is firmly attached, hook the tip of the armrest to the metal
frame of the seat and then press it for fastening. Shake the armrest a little to check if the
it is installed properly (Pic 6).
7. Through the mounting holes on the tip of the armrest, screw the two M5x14-12.9
zinc-plated internal hex screws and the 6x12x1.5 zinc-plated flat washer with the provided
4# Allen wrench to affix the armrest to the metal frame of the chair (Pic 7).
8. Screw the rest of the armrest to the chair with five M4x10 screws (Pic 8).
9. Insert the hooks at the bottom of the armrest decoration in the groove under the armrest.
Use the two metal locks in the middle to affix to the armrest (Pic 9).
10. From the inner shoulder area of the armrest, use one ST4.2x12 screw to attach firmly the
armrest decoration to the armrest. Shake slightly the armrest again to check its stability.
Repeat the same steps for the other armrest (Pic 10).
Pic 6
shaft
Pic 5
rear end
Pic 8
Pic 9
Pic 10
How to Use
Pic 7
Summary of Contents for MAX-76A100
Page 1: ...User Manual MAX 76A100...
