P.23
5. Leg Rest Installation
Pic 1
Pic 2
Pic 4
Pic 3
Pic 5
How to Use
1. Cut the cable tie on the connection wires and the air pipe (Pic 1).
2. Connect the connection wires and the air pipe from the frame to those from the calf rest
properly. And then tuck the wires and the air pipes inside the bottom of the chair. Mind the
rupture of the air pipe (Pic 2).
3. Put the inner and outer rotating sleeves on the left and right shafts of the calf rest (note:
the thicker side of the cover faces inward) (Pic 3).
4. Open the rotating shaft cover of the chair (Pic 4).
5. Hang the calf rest (by the left and right shafts) on the rotating shaft of the chair (Pic 5).
6. Close the leg rest cover, which should be pressing the tube covers (of the leg rest shaft).
Use the provided 4# Allen wrench to screw the two M5x14-12.9 zinc-plated internal hex
screws and the 6x12x1.5 zinc-plated flat washer to fasten the cover. The calf rest
installation is complete (Pic 6).
outer rotating sleeves
inner rotating
sleeves
Pic 6
Summary of Contents for MAX-76A100
Page 1: ...User Manual MAX 76A100...
