MAXA i-32V5C MIDI 0121, Manual

Page: 8 / 36

Controllo per i-32V5 MIDI
Air/water inverter chillers and heat pumps with axial fans
8
4.1 DISPLAY
4.1.1 KEYS
Select the operating mode and manually reset any alarms.
Each time you press the key you have the following sequence:
OFF -> COOL -> COOL+SAN* -> HEAT -> HEAT+SAN* -> OFF (*= if sanitary is enabled)
During parameter settig has the function of the back key.
Allows to enter the selected menu to view the sub-folders or to set a value (e.g. summer, winter and domestic set-points or various
parameters).
UP key allows to move to a higher menu or to increase the parameter value.
DOWN key allows to move to a lower menu or to decrease the parameter value.
4.1.2 LED
Cooling mode LED: is on if COOL or COOL+SAN mode is selected.
Heating mode LED: is on if HEAT or HEAT+SAN mode is selected.
Pump Led: is on if the pump is active.
Alarm Led: is on if there are active alarms.
Defrosting Led: flashes to enter defrosting mode, it is on when defrosting is in progress.
Compressor Led: flashes if the compressor is starting up, it is on if the compressor is active.
Sanitary led: flashes if sanitary production is in progress, it is on if COOL+SAN or HEAT+SAN mode is selected and sanitary produc -
tion is not in progress.
Led KA resistors: is on if the antifreeze resistors are active.