Max RB215, Operating And Maintenance Manual

Page: 8 / 22

15. USE ONLY THE AUTHORIZED BATTERY PACK
Use only an authorized JP battery pack. If the tool is connected to a power supply other than the
authorized pack, such as a rechargeable battery, a dry cell, or a storage battery for use in automobiles,
the tool may be damaged, break down, overheat, or even catch on fire. Don’t connect this tool to any
power supply except the authorized JP battery pack.
16. TO ENSURE MAXIMUM PERFORMANCE, FULLY CHARGE THE BATTERY BEFORE USE
A new battery pack or one not used for extended periods may have self-discharged and thus may need
recharging to restore it to a fully charged condition. Before operating the tool, make sure to charge the
Battery pack with the designated MAX Battery charger JC524H.
17. BATTERY CHARGING PRECAUTION
①
Use only authorized battery charger Panasonic Battery charger EY0230B and Battery Pack
JP409
Failure to do so may cause the Battery to overheat or catch fire leading to serious injury.
②
Charge the Battery only to an AC 230V wall socket
Failure to do so may result in overheating, or inadequate charging possibly causing serious injury.
③
Never use a transformer
④
Never connect the Battery charger to an engine generator direct-current power supply
The charger will break down or be damaged from burning.
⑤
Avoid charging the Battery pack in the rain, in a damp place, or where water is splashing
Charging a damp or wet Battery pack will cause an electric shock or a short circuit that may lead to
damage from burning and even the tool catching on fire.
⑥
Don’t touch the power cord or plug with a wet hand or glove
This may cause injury from electric shock.
⑦
Don’t put a cloth or any other cover on the Battery charger while the Battery pack is being
charged
This will cause overheating and damage from burning, or the Charger may even catch fire.
8