BE SURE TO READ
2
WARNING
Never disassemble or modify the machine
–– it can cause a fire, electric shock, or
trouble.
Never modify the AC cord. The modified cord can led to a fire or electric shock.
Do not put any foreign substance, such as a finger, a pen, or wire, inside the machine
–– it can damage the machine or cause a fire or electric shock.
Obtain power directly from an electric outlet. Do not put too much load on one electric
outlet
–– it can cause a fire.
Never put a heavy object on a power cord
–– the cord can be damaged, leading to a fire
or electric shock.
Do not disconnect/reconnect a power plug with a wet hand
–– you could receive an
electric shock.
Take care not to splash water or chemicals over the machine. If any liquid should
somehow get inside the machine, disconnect the power plug immediately from the
electric outlet, and contact our dealer for repair. If the machine is used in that state, it
may cause malfunction, damage, fire or electric shock.
Use only specified AC Adapter appended to the machine.
Never operate the machine with wet hand or with wearing wet clothes
– you could
receive an electric shock.
Never cover the machine with paper or cloth while the machine is connected to the
electric outlet.
Do not use a machine that is out of order. If used in such condition, for example, when
emitting smoke or an abnormal sound or peculiar odor, it can cause a fire or electric
shock. Disconnect the power plug immediately from the electric outlet, and contact
our dealer.
Never use the AC cord with leaving it bundled or winded. This may lead to a fire or
damage to the AC cord.
Never use the damaged AC cord. The damaged AC cord may lead to damage to the
machine, a fire or electric shock.
When disconnecting the power cord, never hold the AC cord by the cord and make sure
to hold it by the plug. Pulling on the cord may lead to damage, which causes fire or
electric shock.
Make sure to connect the AC plug to an electric outlet which meets the input
specification of the AC adaptor. Mismatch may lead to damage of the machine, a fire or
electric shock.
Make sure to clean the power plug periodically. Leaving the connected power plug
without clean up may lead to accumulated dusts causing a fire or damage to the
machine.
Never touch the printer head. Immediately after printing, it is very hot and it may cause
burn on the hand and/or the fingers
.
Never touch the cutter parts (the blade of Half-cutter and Full cutter) of the instrument.
Touching the cutter blades may cause serious injury
.
