BASIC OPERATION
26
4.
BASIC OPERATION
1. Open the cassette cover and load the consumables to use.
(See 3: LOADING THE
CONSUMABLES)
Then, close the cassette cover and turn the power on.
2. [
PRINTED MATERIAL setting screen
] appears.
Press ▲/▼/ / key to select “
PRINTED
MATERIAL
” and “
SIZE
.”
Press ENTER , then [
INPUT screen
] appears.
Note:
● When changing the material, press SHIFT → Esc (P.MATERIAL).
Then [
PRINTED MATERIAL setting screen
] appears.
After changing the kind of material (
“TUBE” to “TAPE” or “TAPE” to “TUBE”),
[PITCH LENGTH setting screen] appears. Input the desired pitch length and
then press ENTER .
● When changing the material with pressing SHIFT → Esc (P.MATERIAL), the
“
CHARACTER SIZE
” is automatically changed to “
AUTO
”.
However, when the selected printed material is TAPE,
“
CHARACTER SIZE
” is not
changed to
“
AUTO
”.
● If any document is remained in the [
INPUT
screen
] before turning off the power, the right
screen appears when turning the power on next
time.
Press ▲/▼ key to select “
INITIALIZE
” or
“
CONTINUE
.”
▲
/
▼
key: Move the cursor between
“
MATERIAL
” and “
SIZE
”
/
key:
“
MATERIAL
”
･･･
Select from
“
GENERIC TUBE
”, “
MAX TUBE
”, “
SHRINKABLE TUBE
”,
“
NON PVC TUBE
” , “
OVAL TUBE
”, “
TAPE
” or “
ID PLATE
”
“
SIZE
”
････････
MAX TUBE:
Select from
“
3.2
”,”
3.6
”,”
4.2
”, ”
5.2
”, “
6.4
” or “
8.0
”.
GENERIC TUBE:
Select from
“
1.5
”, “
2.0
”,“
2.5
”,“
3.2
”,”
3.6
”,”
4.2
”,”
5.2
”, ”
5.5
”, “
6.5
” or “
8.0
”.
SHRINKABLE TUBE:
Select from
“
2.0
”, “
2.5
”,“
3.2
”,”
3.6
”,”
4.2
”,”
5.2
”, ”
5.5
”, “
6.0
” “
6.5
” or “
6.8
”.
NON PVC TUBE (
“PVC free” TUBE):
Select from
“
3.2
”,”
3.6
”,”
4.2
” or ”
5.2.
”
OVAL TUBE:
Select from
“
2.5
”,“
3.2
”,”
3.6
”,”
4.2
”,”
5.2
”, ”
5.5
” or “
6.5
” .
TAPE:
Select from
“
5
”,”
9
” or “
12
.
”
ID PLATE:
Select from
“
2.5
”,”
4.6
”,”
6.3
” or “
9.0
”.
Ｆ Ｉ Ｌ Ｅ Ｂ Ｅ Ｉ Ｎ Ｇ Ｉ Ｎ Ｐ Ｕ Ｔ
Ｉ Ｎ Ｉ Ｔ Ｉ Ａ Ｌ Ｉ Ｚ Ｅ
Ｃ Ｏ Ｎ Ｔ Ｉ Ｎ Ｕ Ｅ
［ＰＲＩＮＴＥＤ ＭＡＴＥＲＩＡＬ］
ＭＡＴＥＲＩＡＬ＝
ＭＡＸ ＴＵＢＥ
ＳＩＺＥ＝３．２
