Tools required to complete
1. Screwdrivers
4. Scissors
2. Pliers
5. Measure or Ruler
3. Modelling Knife
Additional items required to complete
3350mAh - 5550mAh 4S 14.8V Li-Po battery (POWER-TECH
5550mAh 33C 4S 14.8V
recommended Part No.
PT-B-3355504S)
Charger (Power-Tech C6, B606 or X-Drive 6 recommended)
2.4GHz Transmitter
2.4GHz Receiver
Self-Adhesive Tape
Thread Locking Compound
Recommended Item:
Servo Tester (Power-Tech, Part No. PT-ACC-ST)
Please 0ote:
“EPOFLEXY” is a very tough and durable material perfect for the manufacture of model
aircraft. When using screwed fixings with “EPOFLEXY” components it is important to
tighten the screws sufficiently to provide a firm fixing.
Excess tightening could result in the foam material becoming compressed, possibly damaging
or distorting the part. Take care to ensure that all screws are tightened sufficiently to provide
a firm fixing, but do-not over tighten. We recommend that all fixings are checked regularly
for security and safety purposes.
3
