background image

MAX PROP

®

 GENERAL SALE CONDITIONS

1.  All the components of each propeller must not be modified in any way or for any reason.

2.  All the components of each propeller are not interchangeable between a propeller and the 

other.

3.  The propeller must be used following the instructions of the manual enclosed with the prop, 

paying particular attention to the warnings.

4.  The non-compliance of the conditions 1, 2 and 3 means the loss of the warranty.

5.  Max Prop Srl is to repair and replace free of charge the original pieces of the propeller which 

may result damaged due to construction defects or due to material defects. Max Prop Srl 

will not pay, for any reasons, any refund whatsoever, not even partial. The warranty granted 

by Max Prop Srl is therefore limited exclusively to the repair or replacement of any possible 

defective propeller and does not include any damage compensation refund, or claim of any 

kind. 

6.  The reparations in warranty, that might be needed, will be carried on exclusively by Max Prop 

Srl at its own workshop in Italy - Milan – Via Bernardino Galliari, 1. The customer will, at his 

own charge and care, send the defective pieces to our workshop. 

7.  This warranty is valid 12 months starting from  the date of propeller delivery. 

8.  Any possible controversy will fall within the jurisdiction of the Milan Courts-Italy. 

9.  The transport cost charged in the invoice from Max Prop doesn’t include any insurance. The 

costumer notes that the insurance (even if pre paid from Max Prop), from the order confirm 

and from the payment of the proforma, is not included on the transport. In case the customer 

wants to insure the shipment, he will have to get in touch directly with the transporter and 

agree an upgrade of the shipment charge with an insurance cover policy. In no way Max Prop 

Srl can be considered responsible for any loss, damage or delay starting from when the goods 

are given to the courier. The costumer itself must be considered responsible for any loss , 

damage or delay due to the transport, in case he has chosen not to stipulate a transport 

insurance with the courier. 

10. These conditions of sale are integral part of any purchase contract agreed with Max Prop Srl. 

11. The official and binding text of these general sale conditions is the one edited in Italian, any 

translations in other languages are a form of courtesy. It is estabilished that the Italian text 

will be the only value text.

12. The  customer  confirms  that  the  purchase  price  of  the  propeller  has  been  established 

considering his acceptance of the present general conditions of sale. With this acceptance 

the customer excludes any type of claim. 

manufactured by: 

MAX PROP 

®

via Bernardino Galliari, 1 - 20156 Milano - ITALY

tel. +39 02 33 404 325 - skype: maxprop1
www.maxprop.it - [email protected]

Summary of Contents for WHISPER 5 BLADES













Reviews: