MAX POWER
TEST RESULT FORM (part 1)
This form must be filled out and faxed to MAX POWER within a week after launching
so that the MAX POWER standard warranty is validated.
MAX POWE
R
Via Philips 5,20900, Monza
Italy
Tel : (3
9
)
039 200 1973-936
Fax : (3
9
)
039 2004299
From
:
………………………………
………………………………
………………………………
………………………………
………………………………
………………………………
………………………………
Date : …………………………
REFERENCE : S _ _ .R4_ _ . _ _ _ _
10. Shipyard that installed the RETRACT: ………………………………………………
11. Name of the Project Manager: ………………………………………………………..
12. Name of the Vessel: …………………………………………………………………..
13. Type & Make of the Vessel: …………………………………………………………..
14. Date of launching: ……………………………………………………………………...
Please answer by YES or NO the following questions concerning the installation:
YES NO
1 Is the RETRACT mounted parallel with the bottom of the hull?
2 Is there enough room for general maintenance of the RETRACT and its auxiliary
equipment?
3 Does the closing plate rest upon a gasket?
4 Is the adjustment of the closing plate done in such a way that no light is allowed to
enter?
5 Are the anodes correctly fitted to the closing plate supports?
6 Have you re fitted a cable tie in the manual lowering screw as in drawing?
7 Is the RETRACT unit glued to the mounting base?
8 Have you screwed the manual override screw back to its closed position
9 Is the pressure relief valve set to 220 bar
10 Are all-electrical wires numbered at each end and with their terminals tinned?
11 Is the electrical supply to the remote control box constant and stable?
- 17 INSTALLATION MANUAL RETRACT R 450
