13
14.4. Trip Altitude and Heart Rate data review
(Wintech USB Alti, Wintech USB HR and Wintech USB Ultimate only)
Enter the elevation set up and data review menu:
From any screen, press the left button for 2 seconds.
– On Wintech USB Alti and Wintech USB Ultimate, briefly press the left button (BPL) twice to switch to the altitude and heart rate review data section: “Info” appears on the computer screen.
– On Wintech USB HR “Info” appears on the computer screen.
Briefly press the right button (BPR) to enter the altitude and heart rate review data section.
The review of trip altitude and heart rate data automatically starts in the following order:
– Highest trip elevation “Hi” (Wintech USB Alti and Wintech USB Ultimate only)
– Lowest trip elevation “Lo” (Wintech USB Alti and Wintech USB Ultimate only)
– Time spent bellow the HR target zone “Lo” (Wintech USB HR and Wintech USB Ultimate only)
– Time spent into the HR target zone “In” (Wintech USB HR and Wintech USB Ultimate only)
– Time spent above the HR target zone “Hi” (Wintech USB HR and Wintech USB Ultimate only)
Each piece of information is displayed for 3 seconds.
For Wintech USB HR, if no heart rate information has been recorded during the trip (when not wearing the HR belt for instance),
it is not possible to enter the Heart rate data review section when briefly pressing the right button on the “Info” screen.
For Wintech USB Ultimate, if no heart rate information has been recorded during the trip (when not wearing the HR belt for instance),
only elevation information will be displayed.
These data will cycle through until you press and hold the left button for 2 seconds. Then, the computer switches back to the last active screen.
If no button is pressed for 2 minutes, the computer automatically switches back to the last active screen.
14.4
2 sec.
Alti
Ultimate
HR
2 click
1 click
after
3 sec
auto
2 sec
2 sec
2 sec
2 sec
2 sec
after
3 sec
auto
after
3 sec
auto
after
3 sec
auto
after
3 sec
auto
any
screen
EXIT
EXIT
EXIT
EXIT
EXIT
