9
10.4.2. Choose the bike number you wish to set up the wheel circumference and
distance unit for.
Briefly press the left button (BPL) to change from BK 1, to BK 2 to BK H (for home trainer).
Briefly press the right button (BPR) to validate your selection and switch to the wheel
circumference set up screen. The first wheel circumference of the selected bike flashes.
10.4.3. Set up the wheel circumference of the selected bike.
Briefly press the left button (BPL) to set up the first digit of the chosen bike wheel circumference.
Briefly press the right button (BPR) to validate your choice and move to the next digit.
Repeat those steps to the 4
th
digit. Validating the 4
th
digit by a brief press on the right button
(BPR) will move you to the distance unit setting screen. The distance unit display flashes.
10.4.4. Select the distance unit of the selected bike.
Briefly press the left button to select kilometres (KM) or Miles (Mi).
Briefly press the right button (BPR) to validate your selection and exit the wheel circumference
and distance unit set up menu. You will automatically return to the last active display.
Choosing the distance unit (Km or Mi) automatically updates the elevation (m or ft) and
temperature unit (°C or °F) according to the metric or imperial measurement standard.
To set up the wheel circumference and distance unit for a 2
nd
bike sensor or the home trainer
sensor, proceed again to the operations described above, selecting the correct bike number.
10.5. Clock set up
Enter the Clock set up menu:
From any active display, press and
hold the right button (BPR) for 6
seconds.
– On Wintech USB Ultimate, briefly
press the left button (BPL) 4
times to move to the clock set
up section. The current clock is
displayed on the screen.
– On Wintech USB Alti and
Wintech USB HR, briefly press
the left button (BPL) 3 times to
move to the clock set up section.
The current clock is displayed on
the screen.
– On Wintech USB, briefly press
the left button (BPL) twice to
move to the clock set up section.
The current clock is displayed on
the screen.
Briefly press the right button
(BPR) to start the clock settings
operations. The first hour digit
flashes.
Briefly press the left button (BPL)
to adjust the first hour digit. Briefly
press the right button (BPR) to
validate your choice and move to
the next digit.
Repeat those steps to the 2
nd
minute digit. Validating the 2
nd
minute digit by a brief press on the
right button (BPR) will exit the set
up menu and switch back to the
last active screen.
10.5
6 sec.
4 click (Ultimate)
3 click (Alti, HR)
2 click (USB)
1 click
1 click
1 click
1 click
1 click
any
screen
select
select
select
select
EXIT
