18
Power Consumption
40W
Neon-Tube 2*36W
Capacity
Up to 60.000 Ltr in ponds and aquariums
Max. Through Flow
6000Ltr/h
Length 980
mm
CUV-172
Connection 230V/50Hz
Power Consumption
40 W
Neon-Tube 2*36W
Capacity
Up to 60.000 Ltr in ponds and aquariums
Max. Through Flow
6000Ltr/h
Length 980
mm
CUV-155
Connection 230V/50Hz
Power Consumption
60W
Neon-Tube 55W
Capacity
Up to 50.000 Ltr in ponds and aquariums
Max. Through Flow
5000Ltr/h
Length 604
mm
Instruction
Before: There is no pump included in delivery. The unit is an add-on, which incorporated in an existing filter-system to
increase the filtration performance of the existing filter.
•
This unit can destroy harmful bacteria and algae in aquariums and ponds, to develop a healthy life-environment
for the fishes and/or minimalize water turbidity.
•
Fix the unit as possible with screws or the like.
•
Connect the input (on the right side) of the unit with the output of the water pump.
•
Connect the output (on the left side) of the unit with the input of the water filter.
•
Use certainly not the two opposite circuit points as in- and output.
•
Make sure that after a few minutes after starting the water circulation that no air blowing is in the chamber which
may affect the circulation.
•
You should see already first results after about a week.
You should certainly observe that a clean filter is necessary for this.
•
You find details on the configuration of the unit in the following image.
