MT-DB-U4
User Guide
Legal
Legal
Copyright Notices
Portions of this code are copyright (c) 2009-2013 Justin Mattair (
www.mattairtech.com
)
This code uses the LUFA USB library Copyright (C) 2013, Dean Camera (
www.fourwalledcubicle.com
)
and distributed under a modified MIT license (see files).
The CDC and DFU bootloaders are modified versions from LUFA.
The Arduino core files are copyright (c) 2005-2013 David A. Mellis (
www.arduino.cc
),
copyright (c) 2004-2010 Hernando Barragan (
wiring.org.co
),
Copyright 2011-2013, Paul Stoffregen, [email protected],
copyright (c) 2006 Nicholas Zambetti,
and copyright (c) 2009 Brett Hagman.
They were modified by Justin Mattair and retain the LGPL 2.1 license (see files).
The Bitlash files are Copyright (C) 2008-2012 Bill Roy (
bitlash.net
)
They were modified by Justin Mattair and retain the original BSD style license (see files).
Portions of this code are copyright © 2003-2012, Atmel Corporation (
http://www.atmel.com/
)
Software Warranty Disclaimer
The author disclaim all warranties with regard to this software, including all implied warranties of
merchantability and fitness. In no event shall the author be liable for any special, indirect or
consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in
an action of contract, negligence or other tortious action, arising out of or in connection with the
use or performance of this software.
Hardware Disclaimer
This development board/kit is intended for use for FURTHER ENGINEERING, DEVELOPMENT, DEMONSTRATION, OR
EVALUATION PURPOSES ONLY. It is not a finished product, and may not (yet) comply with some or any
technical or legal requirements that are applicable to finished products, including, without
limitation, directives regarding electromagnetic compatibility, recycling (WEEE), FCC, CE, or UL
(except as may be otherwise noted on the board/kit). MattairTech LLC supplied this board/kit AS IS,
without any warranties, with all faults, at the buyer's and further users' sole risk. The user assumes
all responsibility and liability for proper and safe handling of the goods. Further, the user
indemnifies MattairTech LLC from all claims arising from the handling or use of the goods. Due to the
open construction of the product, it is the user's responsibility to take any and all appropriate
precautions with regard to electrostatic discharge and any other technical or legal concerns.
The product described in this document is subject to continuous development and improvements. All
particulars of the product and its use contained in this document are given by MattairTech LLC in good
faith. However all warranties implied or expressed including but not limited to implied warranties of
merchantability or fitness for particular purpose are excluded.
This document is intended only to assist the reader in the use of the product. MattairTech LLC shall
not be liable for any loss or damage arising from the use of any information in this document or any
error or omission in such information or any incorrect use of the product.
Trademarks
AVR
®
is a registered trademark of Atmel Corporation.
All other trademarks are the property of their respective owners.
December 30, 2015
36
http://www.mattairtech.com/
