- 4 -
4. Installation
The mounting part of the Flow Monitor is a G1 screw. Install the Flow Monitor either horizontally or
vertically with the use of the G1 locknut and packing provided with the device.
If there is any concern about the screw loosening, apply liquid gasket.
If the Flow Monitor is to be used outdoors, attach a rain cover or similar protective cover to minimize
the entry of rain water. Do not install the Flow Monitor at a location where light may shine on the
transmitting surface at the G1 screw end, as this may cause a malfunction.
Flow Monitor
Packing
Locknut
Apply liquid gasket to fill any
gaps in the screw part and the
packing before mounting.
Inner wall of pipe
Fig. 3 Mounting Section Detail
Fig. 2 Installation Example
Cover
Housing
G1 screw
Inner wall of pipe
