Matsusada EP Series, Instruction Manual

Page: 16 / 20

10
5-9 Command List
Category Command Features Page
Setting
Output Voltage VSET Output voltage setting 10
Output SW Setting of the output ON/OFF. 10
Local/Remote
REN
GTL Remote setting
Local setting 11
11
Measure
ment Output
Voltage VGET Output voltage measurement 11
Current IGET Output current measurement 11
Status Checking STS Status Checking 12
5-10 Detail of command
VSET Command
Set output voltage.
Operating
range
0 to Rated voltage
resolution 1
unit V
Format
examples
VSET 1234
⇒
Set 1234V
Initial
value
0
query
In response to “VSET?”, the set voltage value is returned.
Remarks
・
Settings out of the operating range are ignored as invalid commands.
・
This command supports multi-command execution.
SW Command
Sets the output ON/OFF.
Operating
range
0 / 1 (0 is OFF, 1 is ON)
Format
examples SW0
SW1
Initial
value
0
query
In response to “SW?”, SW0 or SW1 is returned.
Remarks
・
Faults are reset with SW0 command.
・
This command supports multi-command execution.
5. Option