Matsusada EP Series, Instruction Manual

Page: 10 / 20

4
３－１ Outline
EP series is high performance high voltage power supply for PMT application. Ultra compact
size of just 8.35-inch(212mm) width integrated HV power supply and power supply for
preamplifier ±15V and ±5V. The ultra low ripple noise is suitable for PMT and various
other applications.
３－２ Operation method
1. Upon confirming the connection made with this unit as specified (P.2 [HOW TO GROUND]),
operate it. Be sure to connect the earth with the ground terminal of the unit.
2. Connect the attached AC input cord with AC input connector.
3. Turn on the POWER Switch. The unit gets in stand-by mode.
4. Turn the output voltage setting dial to adjust the voltage as desired.
When the HV is OFF, value of each digit can be set with cursor key.
When the HV is ON, the output voltage can be set each 1V.
5. When the HV is OFF, the set voltage on the display.
When the HV is ON, the output voltage and current on the display.
6. For ending the operation of the power supply, turn off the POWER ON/OFF switch. The set
value is returned to 0V.
３ Operation manual
３ Operation manual
FOR PREVENTION OF DANGER, BE SURE TO CONNECT GND
TERMINAL TO THE EARTH