Matsusada AUH Series, Instruction Manual

Page: 8 / 28

1-1
１ I n t r o d u c t i o n
1 Introduction
１－１ Introduction
Thank you very much for your purchase of our product HIGH VOLTAGE POWER SUPPLY. We have
done our best to
for the quality control of our products
. Please handle this unit properly according to
this instruction manual so that you can use the full performance of this unit safely for long.
We have carefully prepared this instruction manual, but if you find any doubtful or
unclear point or any omission, please kindly contact us shortly.
１－２ Specifications
Input Voltage AC200V-240V、50/60Hz、1φ
AC200V-240V、50/60Hz、3φ (optional only -L200V3P)
Output Control Local mode : For constant voltage mode front panel 10-turn potentiometer
For constant current mode front panel 10-turn potentiometer
Remote mode :For constant voltage mode 0 to 10Vdc external voltage
For constant current mode 0 to 10Vdc external voltage
Voltage Regulation Line : ±0.02％ of maximum voltage for ±10％ input line change
Load : 0.02％ of maximum voltage for 10-100％ load change
Current Regulation Line : ±0.05％ of maximum current for ±10％ input line change
Load : 0.05％ of maximum c100μA for 10-100％ load change
Ripple Less than 0.3％p-p + 1Vrms
Less than 0.1％p-p + 1Vrms (optional only -L200V3P)
Stability 0.05％/Hr
Temperature Coef 0.01％/℃
Metering Output voltage 3
½
-digit meter
Output current 3
½
-digit meter
Monitor Output Output voltage monitor 10V／maximum output voltage
Output current monitor 10V／maximum output current
（output impedance 1kΩ）
Protection Over Voltage, Over Load, Short Circuit, Arc, Over Temperature
Other functions Remote switch ON/OFF, Door switch, Output status signal output(internal relay)
Temperature Temperature 0-40℃（Operating）、-20-70℃（Storage）
Humidity 20-80％ＲＨ（ｎo condensation）
＊These Specifications are at the maximum rated output after a warm-up period unless otherwise specified.
Dimensions 266H×483W×610D(mm)