1-3
１ I n t r o d u c ti o n
・Do not place the power supply where the possibility of condensation.
・Contact us for repair. The power supply should be repaired by us.
・
In case the welding process is presence nearby the power supply, unplug all the connections from the
power supply. .
1-4-2 Connecting AC line input cord
Attach a crimp style terminal to the cord end and connect to the end of AC line input cord
commercial power board.
・Electrically ground the power supply main body with the AC line input connector,
or it is very dangerous.
・The rated input voltage is set when the unit is dispatched from the factory.
Verify the input voltage indicated on the rear panel and input the correct voltage.
・Unless the input voltage is as shown above due to special specifications, verify the input
voltage indicated on the rear panel and input the correct voltage
・Any wrong voltage input may damage the unit.
AC200-240V 50/60Hz 1Φ
AC200-240V 50/60Hz 3Φ
！
CAUTION
！
CAUTION
NO
CAUTION
！
CAUTION
Fig.1.1 Connecting AC line input cord
PUT ON
“
PLASTIC COVER
”
BLACK WHITE GREEN
PUT ON
“
PLASTIC COVER
”
