Matsusada 35, Instruction Manual

Page: 65 / 73

８
–
LEt option
59
2-3. Default gateway address setting
Default gateway address can be set while it displays “Gat” on the front panel.
By turning the voltage setting dial, the address number can be set.
Gat1 Gat2 Gat3 Gat4
Defalut 000. 000. 000. 000
Each address value of number 1 to 4 can be set by the current setting dial.
(000 to 255)
Default gateway
address number Gat 1
Default “000” Default gateway
address number Gat 2
Default “000” Default gateway
address number Gat 3
Default “000” Default gateway
address number Gat 4
Default “000”
VOLTAGE
CURRENT
Voltage setting dial
(Switch address number
）
Current setting dial
(Address setting)
～
SET
OVP/
OCP
LOCK
OUTPUT
CV
V
A
CC
REMOTE
SET
OVP/
OCP
LOCK
OUTPUT
CV
V
A
CC
REMOTE
SET
OVP/
OCP
LOCK
OUTPUT
CV
V
A
CC
REMOTE
SET
OVP/
OCP
LOCK
OUTPUT
CV
V
A
CC
REMOTE
SET
OVP/
OCP
LOCK
OUTPUT
CV
V
A
CC
REMOTE
SET
OVP/
OCP
LOCK
OUTPUT
CV
V
A
CC
REMOTE
3. OVP/OCP
switch (press):
When OVP/OCP is pressed, DHCP setting (“dHCP”) will be displayed, and ON/OFF switching
can be done and DHCP enable/disable can be chosen.
SET
OVP/
OCP
LOCK
OUTPUT
CV
V
A
CC
REMOTE
Change OFF/On setting
at DHCP by pressing
OVP/OCP switch.
VOLTAGE
CURRENT
Current setting dial
Either can be used to
change.
Press down OVP/OCP
* If DHCP is enabled, IP address/Subnet mask/Default gateway address shall be invalid which
are set previously.