Matsusada 35 Instruction Manual Download Page 36

Page: 36 / 73

６

Getting started

６－３

CO-U32m, Standard Digital Interface

Control a RK(400W/800W/1200W)/REK/REKJ series power supply connected to CO-U32m via

USB.

①

Set unit number
Set the UNIT number to “0”.

See section ”

４－２

Setting of UNIT number (unit with Standard Digital Interface)”.

②

Connect to USB
Connect USB connector of CO-U32m and USB controller(e.g.PC) with USB cable(available at

stores).

③

Connect RK(400W/800W/1200W)/REK/REKJ series power supply to CO-U32m
Connect CO-M cable connector(OUT) of CO-U32m to CO-M cable connector(IN) with CO-M

cable enclosed together with power supply.

④

Turn on the power of CO-U32m
Turn on POWER ON/OFF switch of CO-U32m.

⑤

Turn on the power of RK(400W/800W/1200W)/REK/REKJ series power supply

Turn on POWER ON/OFF switch of RK(400W/800W/1200W)/REK/REKJ series power supply.

⑥

Enable remote control
Send a command of “#0 REN” from USB controller.

REMOTE LED shall light on.

⑦

Enable the output
Send a command of “#0 ICN 100”, “#0 OVP100” ,”#0 SW1” from USB controller.

OUTPUT LED shall light on.

⑧

Set output voltage and output
Send a command of “#0 VCN xxxx” from USB controller. Enter numbers of 0 to 100 for xxxx.

Refer to Command list for details.

⑨

Stop the output
Send a command of “#0 SW0” from USB controller.

OUTPUT LED shall turn off.

⑩

Ending the operation
Turn off POWER ON/OFF switch of RK(400W/800W/1200W)/REK/REKJ series power supply.

⑪

Stop remote control
Turn off POWER ON/OFF switch of CO-U32m.

CAUTION

・

Voltage is output actually.

・

Do not connect any load to power supply before this procedure is

completed.

Summary of Contents for 35










































































Search results

Summary of Contents for 35

Reviews:

Related manuals for 35

Brands by name

Popular brands

Matsusada 35, Instruction Manual

Search results

Summary of Contents for 35

Reviews:

Related manuals for 35

Brands by name

Popular brands