GB
7
2. Hold the handle onto the door edge then use a screwdriver and the 2 screws provided to fix the handle
onto the door edge.
Levelling the Wine Cooler
To do this use the two levelling feet at the front of the wine cooler.
If the wine cooler is not level, the door and magnetic seal alignments
will not be covered properly.
Cleaning Before Use
Wipe the inside of the wine cooler with a weak solution of bicarbonate soda. Then rinse with warm water
using a ‘wrung-out’ sponge or cloth. Wipe completely dry before replacing the shelves and bottle rack.
Clean the exterior of the wine cooler with a damp cloth.
If you require more information refer to the
CLEANING
section.
•
Before Plugging in YOU MUST
• Check that you have a socket which is compatible with the plug supplied with the wine cooler.
•
Before Turning On!
• Do not turn on the appliance for two hours after moving the wine cooler. The coolant fluid
needs time to settle.
Before Using Your Wine Cooler
Before placing any wine in your wine cooler, turn it on and wait for 24 hours, to make sure it is working
properly and to allow the wine cooler to fall to the correct temperature. Your wine cooler should not be
overfilled.
