5
GB
Reverse the door swing
- Ensure the appliance is unplugged and empty.
- Adjust the two leveling feet to their highest position.
- We recommend you have someone to assist you.
Tools required
- Phillips style screwdriver
- Flat bladed screwdriver
Note: To take the door off it is necessary to tilt the Appliance backward. You should rest the Appliance on some-
thing solid, e.g. a chair just below the top panel.
DO NOT lay the Appliance completely flat as this may damage the coolant system.
1. Remove the plastic covering from the bottom
door hinge.
1
2
3
4
5
6
7
2. Unscrew the three screws from the
bottom bracket. Remove the foot from
opposite side.
3. Place to one side.
4. Slide the Appliance door down about 15cm
[6”] and off the Top hinge pin and lift away from
the Appliance.
5. Remove the two screws from top bracket and
replace on the other side. You will need to first
remove the plastic caps from the other side.
6. Slide the Appliance door back on to the Top
hinge, making sure it’s the right way up.
Screw the bottom hinge into place on the new side.
Replace the other foot on the other side. Replace
the plastic covering by clicking back into position
on the door hinge.
7. Check that the door is aligned horizontally
and vertically and that the seals are closed on all
sides before finally tightening the bottom hinge.
Re-adjust the levelling feet.
MTT507WW_WWE_100519.indb 5
5/26/10 3:00 PM
