4
GB
Introducing Your New Table Top Fridge
Before use
Please read these instructions carefully before using your new Matsui Appliance.
The Appliance is for indoor, domestic use only.
Install Your New Table Top Fridge
Location
When selecting a position to place your Appliance you should make sure that the floor is flat and firm, and the
room well ventilated. Avoid locating your Appliance near a heat source, e.g. cooker, boiler or radiator. Also avoid
direct sunlight in outbuildings or sun lounges. It must therefore be installed so that the Appliance has at least 10cm
(2 1/2”)
of free space and the sides have 2cm (3/4”). The Table Top Fridge door can either open to the right or the left,
depending on whichever suits you. See page 4 if you want to reverse the door swing. Do not drape your Appliance
with any covering.
Levelling the Table Top Fridge
Remove the packaging support from the base of the Appliance and replace with
the 2 Levelling Feet. Make sure the Appliance is level. Use the Levelling Feet at the
front. If the Appliance is not level, the doors and magnetic seal alignments will be affected.
Cleaning before use
Wipe the inside of the Appliance with a weak solution of bicarbonate soda. Then rinse with warm water using a
damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry completely before replacing in
the Fridge. The external parts of the Fridge can be cleaned with wax polish. If you require more information refer to
Cleaning on page 6.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the Appliance.
If not, see the section called ELECTRICAL CONNECTIONS on page 8.
Before switching on!
DO NOT SWITCH ON UNTIL TWO HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle.
Please Note:
The Ice Box compartment is for ice only and not for freezing food.
Ice tray
Drip tray
Adjustable shelves
Levelling feet
Bottle storage
Ice box
Thermostat
control dial
MTT507WW_WWE_100519.indb 4
5/26/10 3:00 PM
