Matsui M510WM13E, Installation Instructions Manual

Page: 34 / 156

34
GB
Cleaning the Drain Filter
Before cleaning the drain filter, first start the spin programme, then switch off and unplug the
washing machine.
1. Use a small, flat bladed screwdriver to open the Service Flap.
Service Flap
2. Carefully loosen the drain filter. Turn anti clockwise until the water gentle begins to run, this
is normal.
3. Remove the filter once the water has stopped.
4. Remove any lint and debris before carefully replacing the filter.
5. Screw the filter back in.
Preventing a Frozen Water Supply Hose
If your washing machine is delivered in freezing weather conditions,
leave it at room temperature for 24 hours after you’ve set it up before
using it. This ensures there’s no ice blocking the water supply hose. If
your water supply hose freezes, add 2 or 3 litres of warm water to the
drum. Then run a “Drain” only programme.
Cleaning the Filter Net of the Water Supply Hose
If water isn’t draining properly...
1. Turn the water supply off at the tap.
2. Close the washing machine door and select “Spin” programme and press the
Start / Pause
button.
3. When finished, turn the power off. Loosen the water supply hose and remove it from the tap.
4. Use a small brush, e.g. a toothbrush to clean the filter.
5. Re-connect the water supply hose to the tap and turn the tap back on, checking for leaks.
about
50°C
Be careful not to burn yourself while handling your clothes or touching the inside of the
drum after a high temperature wash.
M510WM13E_IB_7L_RC_Final_131125.indb 34 25/11/2013 6:19 PM