!
36
Peripheral Setup Page
This page sets some of the parameters for peripheral devices
installed on the system.
Onboard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
Onboard Serial
Port1
Use this item to enable or disable the onboard
serial port COM1/3, and to assign a port
address
Onboard Serial
Port 2
Use this item to enable or disable the onboard
serial port COM2/4, and to assign a port
address
Serial Port2 Mode
Use this item to allocate the resources of the
second serial port. Under Normal, the
resources are allocated to the onboard serial
port. Under ASKIR or IrDA, the resources are
allocated to the onboard IR port,
IR Duplex
Use this item to define if the optional infrared
port is full-duplex or half-duplex.
Onboard Parallel
Port
Use this item to enable or disable the onboard
parallel port LPT1, and to assign a port address
